Welcome
Hello and welcome to MyChron Mike's Loose Wires, where you can find the latest information on AiM products, ask questions or make a general comment on anything from your last race to inviting me to dinner at the next one. Thanks for stopping by!
Posted by MyChron Mike
July 17, 2008
MyChron4 Firmware Update
This version 31.57.07 is the first official US release to add GPS lap timing functionality, and addresses some other issues.
- MyChron4
- Fixed time visualization bug on split summary page of data recall
- Added GPS Laptimer management
- GPS
- Improved connection procedure in CAN Net
- Added track width configuration from master logger
- Improved test on full memory of maps
- Added management of correspondent tracks on lap timer
- Data Key
- Added sub-revision management in firmup
- Langauges
- Updates Japanese language strings
It is recommended that all MyChron4 be updated to this most current firmware, even if GPS and GPS lap timing is not used. The firmware can be downloaded here. You can grab the most recent version of Race Studio 2 at that same link as well.
Posted by Mike Jaynes at 09:33 PM
July 15, 2008
Race Studio 2 Update
Race Studio 2 goes to version 2.30.04 today with the following improvements:
- Added ECU Support
- Bosch MS4 Sport
- Autronic SM4 v1.09
- EFI Euro6 TC-Trim
- Wolf V500
- Walbro MINJ400 (AiM interface required)
- Magnetti Marelli Ligier JS49 Dash MT940
- Magnetti Marelli Ligier JS49 renamed to Ligier JS49 DDU
- Added management of new MXL Suzuki Plug & Play configurations
- Suzuki GSX-R600 2006-2007
- Suzuki GSX-R750 2006-2007
- Suzuki GSX-R1000 2005-2006
- Suzuki GSX-R600 2007-2008
- Race Studio 2 Analysis
- Improvements made to Track Report
- Added a simplified Basic mode for Suspension Analysis
The new Race Studio 2.30.04 can be downloaded here.
Posted by Mike Jaynes at 03:37 PM
MXL Firmware Update
MXL firmware update v14.86.33 gas gone public and offers the following improvements:
- Added new 3-second filter for water temp sensor.
- Added new 30-second filter for fuel level.
- Added a conditional alarm feature, supported by Race Studio 2.30.04
- Improved button functionality within context. MEM button (local and remote), now also functions as the ">>" button while logging data.
You can download the new MXL firmware, and revision notes here.
Posted by Mike Jaynes at 03:15 PM
Video - Caparo T1, MyChron3
The Caparo T1, developed by the engineers that delivered the McLaren F1. The Caparo T1 does 0-60 in only 2.5 seconds, and is able to sustain g-loads in excess of 3g's in every direction.
CAR Magazine writes "...a power-to-weight ratio double the Bugati Veyron's. And so much downforce, you will be able to drive it upside down in a tunnel at 150 MPH."
This Caparo T1 track-day and road car two-seater features a MyChron3 dash and data logger standard.
Posted by Mike Jaynes at 03:00 PM
July 03, 2008
Happy Independence Day
All of us at AiM Sports would like to wish everyone a safe and happy Fourth of July. In honor of our countries birthday we will close our offices to spend time with friends and families while we celebrate our freedom and the many wonderful opportunities we all enjoy living in America.
MyChron Mike
Posted by MyChron Mike at 11:32 AM
June 25, 2008
Race Studio 2 on a Mac [Update]
[This article is an update to the one originally published in March of 2007]
An increasingly common tech support and pre-sales question is "Does your software run on a Mac?" The short answer is Yes, on Intel based Macs. I use it every day, both on my iMac and my MacBook Pro. The long answer is…
Continue reading " Race Studio 2 on a Mac [Update] "
Posted by Mike Jaynes at 06:15 PM
June 06, 2008
MyChron4 GPS Lap Timing
GPS automatic lap timing has been enabled in this first public release of new MyChron4 and GPS firmware. You can download the update along with the GPS lap timing manual below. Feedback is appreciated.
Download the new firmware, and well as the MyChron4 GPS lap time manual.
MyChron Mike
Posted by MyChron Mike at 01:46 PM
May 27, 2008
Data Seminars in Buffalo Grove, IL
In preparation for the June Sprints, Precision AutoResearch is presenting two 'Race Intelligence' seminars at Perfect Power in Buffalo Grove, Illinois on June 13th and 14th, 2008.
Friday's seminar is a Level 1 and is targeted at racers and mechanics who "have a new system or are considering buying one, this session will be very useful to get started properly and quickly. Comprehensive orientation of the new Race Studio 2 software (setup and analysis) will assist long-time AIM users." This course runs from 12:00 PM on Friday until 7:00 PM.
Saturday's Level 2 course is "intended for existing AiM system data users looking to become advanced users, the techniques and tricks presented are applicable to other data analysis systems as well." This course begins at 9:00 AM on Saturday and finishes up at 4:00 PM.
Both courses are hands-on, racers and crew members are encouraged to bring their laptops.
All the details are here in the PAR Seminar at Perfect Power June 2008 PDF.
Posted by Mike Jaynes at 06:00 PM
May 21, 2008
Data Acq Seminar @ California Speedway, June 6th
Roger Caddell of Victory Lane Data will be providing yet another one of his much sought after automotive data acquisition seminars at the upcoming SCCA Double Regional event at California Speedway, June 6-8th. The data acquisition seminar will be Friday night, June 6th at 6:30 PM. Admission is free for Cal Club members, and $40 for non-members.
Register now at the Cal Club site www.calclub.com
Posted by Mike Jaynes at 10:07 PM
April 24, 2008
MyChron4 Update 31.55.06
A new MyChron4 firmware is available for download. The update contains a bug fix for the RPM Peak Hold function that didn't work properly in some High Stall Clutch applications. Also fixed was a bug that under very rare circumstances would create a problem with data memory. The Dutch language package has been updated, and lastly the firmware updates the MyChron4 data key to version 33.27, which addresses some issues with firmware upgrades for old firmware versions. It is recommended that all MyChron4 owners upgrade.
Click here to download this update. Data key required for firmware upgrade.
Posted by Mike Jaynes at 11:17 AM
April 01, 2008
Race Studio 2 Tutorial
Our very own Trey Shannon has written a tutorial on using the horsepower and torque curve analysis tool, named RPM Analysis, in Race Studio 2. View the PDF here (right-click to download).
Posted by Mike Jaynes at 08:05 PM
March 18, 2008
Seminar, Seminar & Seminar
Victory Lane Data has three upcoming seminars;
March 22nd, 2008 - Karting Data Seminar
at Beaver Run Motorsports Complex in PA hosted by Turn1 ProSports.
April 5th, 2008 - General Data Seminar
at Hale Motorsports in Old Saybrook, CT.
April 19th, 2008 - General Data Seminar
at a pending location in the Los Angeles, CA area.
For more information and to sign up, visit Victory Lane Data
Posted by Mike Jaynes at 08:46 PM
March 04, 2008
Loud Pedal, Part 3
The third and final installment of Data Acquisition: What Racers Need to Know written by Roger Caddell of Victory Lane Data is now available in the latest edition of Loud Pedal. If you missed part one or two, you can click the respective links below.
Loud Pedal Feb 08, Data Acquisition: What Racers Need to Know - Part 2
Loud Pedal Jan 08, Data Acquisition: What Racers Need to Know - Part 1
Posted by Mike Jaynes at 02:58 PM
February 21, 2008
Kart Expo International
"MyChron Mike" McKnight, Chad Brackens, and Aaron Byrd from the AiM Sports Virginia office, along with Roger Caddell from Victory Lane Data will be exhibiting our wares at the 16th Annual Kart Expo International, presented by Sodi Kart.
The show kicks off Saturday morning at 9:00 AM to trade, and noon to the public, the show runs through 4:00 PM on Sunday. This years show is again at the Renaissance Hotel and Convention Center in Schaumburg, Illinois - just outside of Chicago. Roger Caddell will be giving one of his great "Getting the Most from you MyChron" seminars at 1:00 PM on Saturday.
Posted by Mike Jaynes at 11:21 PM
February 12, 2008
Loud Pedal, Part 2
The second installment on using and understanding data acquisition written by Roger Caddell of Victory Lane Data is now available in the latest edition of Loud Pedal. Click the link below for part two. If you missed part one you can click the second link below for it.
Loud Pedal Feb 08, Data Acquisition: What Racers Need to Know - Part 2
Loud Pedal Jan 08, Data Acquisition: What Racers Need to Know - Part 1
Posted by MyChron Mike at 04:22 PM
