« September 2008 | Main | November 2008 »

October 13, 2008

Race Studio 2.30.10

Okay, so I released Race Studio v2.30.09 early, apparently it wasn't meant for public release, though there are no problems with it. I published it for some early use of the Mitsubishi EVO X ECU driver. Today, officially, Race Studio 2 version 2.30.10 is released with the following improvements, most of which were in 2.30.09:

The new Race Studio 2.30.10 can be downloaded here.

Posted by Mike Jaynes at 06:16 PM | Comments (0)

October 03, 2008

Mitsubishi EVO X

With today's release of Race Studio 2.30.09, the ECU connection was added for the Mitsubishi EVO X, a much anticipated protocol.

Now with a simple two wire connection, a nice set of 15 channels are available from the car's high speed CAN data bus.

Documentation is forthcoming, for those anxious to get started, you can tap in to the high-speed CAN-bus at the connector to the left of the clutch pedal, which connects through the differential control unit (see photo below). This protocol will work with the AiM MXL, MyChron3 XG Log, MyChron3 Visor, the EVO3 Pista and Pro, and the soon to be released AiM EVO4.

EVO-X-CAN-2_900.jpg

Posted by Mike Jaynes at 11:16 PM | Comments (3)

Race Studio 2.30.09 Released

Race Studio 2 version 2.30.09 is being released today with the following improvements:

The new Race Studio 2.30.09 can be downloaded here.

Posted by Mike Jaynes at 01:55 PM | Comments (0)