« Race Studio 2.30.09 Released | Main | Race Studio 2.30.10 »
October 03, 2008
Mitsubishi EVO X
With today's release of Race Studio 2.30.09, the ECU connection was added for the Mitsubishi EVO X, a much anticipated protocol.
Now with a simple two wire connection, a nice set of 15 channels are available from the car's high speed CAN data bus.
- Available Channels
- Engine RPM
- Speed
- Speed, Front Left
- Speed, Front Right
- Speed, Rear Left
- Speed, Rear Right
- Pedal Position
- Throttle Position
- Throttle Position, Input Drive by Wire
- Brake Switch
- Engine Temperature
- Mass Air Flow
- Turbo Pressure
- Steering Angle
- Steering Speed
Documentation is forthcoming, for those anxious to get started, you can tap in to the high-speed CAN-bus at the connector to the left of the clutch pedal, which connects through the differential control unit (see photo below). This protocol will work with the AiM MXL, MyChron3 XG Log, MyChron3 Visor, the EVO3 Pista and Pro, and the soon to be released AiM EVO4.
Posted by Mike Jaynes at October 3, 2008 11:16 PM
Comments
Do you also have ECU Connect for the Evo IX and the MXL dashes?
TIA.
Rob
Posted by: Rob at November 15, 2008 03:11 PM
We have many other ECU protocols being developed, or in beta now. The EVO IX is not specifically one of them, though one in particular may work well with the EVO IX. Depending on the 'success' of the EVO X protocol, and number of requests for EVO IX, one may be specifically developed for it.
Posted by: Mike Jaynes at November 17, 2008 12:12 PM
Thanks Mike, we already have several free programs that read it but having used several MXLs already in our BMW race program, I would love to see the MXL series grow in the Evo 8/9 community and be able to use it in our cars.
Posted by: Rob at November 18, 2008 11:54 AM