February 01, 2013
Solo - "… an ingenious little data-capturing device"
SportsCar Magazine hit the Streets of Willow for a six-tire shootout aboard a 2013 Scion FR-S. On-board, connected to FR-S ECU, locked onto the overhead satellites, and gathering all the tire test data was our Solo DL. SCCA members can read the complete article in your March 2013 edition of SportsCar or preview the article in digital form here.
SportsCar had this to say about the Solo DL. "The AiM Sports Solo DL is an ingenious little data-capturing device. Able to run off its own internal power, or off your car's 12-volt system, it's perfect for any application. AiM also has protocols for more than 300 different ECUs, making it possible to tap into everything from an OE unit to a race-specific standalone unit for more data. When paired with the SmartyCam video camera, you probably have every piece of information you will likely ever need."
Posted by Mike Jaynes at 08:41 PM
December 06, 2012
Solo Review in Sport Rider Magazine
The December 2012 issue of Sport Rider Magazine features a review of our Solo lap timer and data logging system. Pick up the current issue on the newsstand, or head over to www.sportrider.com and read the article here.
Sport Rider has made the Solo their data tool of choice for testing. Wait 'til they find out that the Solo DL would give them 21 more channels of data from late model Gixxers, with more manufacture support to follow.
Posted by Mike Jaynes at 03:10 PM
November 06, 2012
GSX-R Plug & Play for Solo DL and EVO4
Added to our industry leading list of ECU connection list are plug and play connections for the Suzuki GSX-R600 or GSX-R750 (2006+), the GSX-R1000 (2005+), and the GSX-R1300 Hayabusa (2008+). Also new are the dedicated cables made to plug into stock connections.
Connect a Solo DL or EVO4 to your bike (or bike engine) and let the data flow.
- 21 channels of valuable data, including:
- Engine RPM
- Throttle Position
- Gear Number
- Battery Voltage
- Engine Coolant Temperature
- Intake Air Temp
- Manifold Air Pressure
- Barometric Pressure
- Boost Pressure
- Air/Fuel Ratio
- Neutral Signal
- Clutch Switch
- Injector Pulse Width #1
- Injector Pulse Width #2
- Injector Pulse Width #3
- Injector Pulse Width #4
- Drive Mode Selector
- XON Switch
- Air Supply System
- Ignition Angle
- Secondary Throttle Position
Couple that list of 21 data channels with all that the GPS of the Solo DL provides, and at $699, it's a no-brainer. Or step up to the EVO4 when you need more inputs, like brake pressures, or suspension measured as high as 1000 times per second (1000 Hz).
Download the AiM Infotech document here, see just how easy it is.
Posted by Mike Jaynes at 05:31 PM
July 03, 2012
MXL Dash for EVO4
MXL Dash for EVO4.
The new MXL Dash displays all pertinent parameters to the racer, such as RPM, speed, gear number, engine vitals, alarms and lap times. Like it's sibling dash-logger, the MXL Dash features 6 configurable alarm LED's and 10 gear flash LED's working in two sets of 5.
The MXL Dash features a robust, light aluminum body and a backlit, high contrast LCD display for excellent visibility in every lighting condition.
- Tech Specs:
- IP65 Weather-proofing
- Dimensions: 179 x 91 x 26 mm
- Weight: 500 g
The new MXL Dash is available now for your EVO4 at a price of $899, or available in kit form with an EVO4 data logger and accessories for $1999. Contact your preferred AiM dealer to purchase.
Posted by Mike Jaynes at 03:14 PM
November 01, 2010
SmartyCam Contingency: 2010 SKUSA SuperNats
AiM Sports has teamed up with SKUSA to giveaway SmartyCam video systems in each participating class at this year's SuperNationals event in Las Vegas...
CLICK HERE for more information
Attention: SKUSA SuperNationals Drivers
Download and print the AiM Sports 2010 SKUSA SuperNationals SmartyCam Contingency Program registration form here...
Contingency Form
Contingency Information Sheet
Posted by joshua at 08:16 PM
September 18, 2009
SmartyManager Update
The SmartyCam is finding it's way to retailers across the US and Canada this week - it has been released!! Along with the SmartyCam release is a rev to SmartyManager.
SmartyManager, the software for previewing a mounted camera, and configuring the graphical elements that display on the resulting SmartyCam video. Version 1.01.04 is available now with the following improvement:
- Translation in Japanese and Spanish
Woo Hoo!? or do we say ¿¡Por fin!?
The SmartyManager software can be downloaded here.
Posted by Mike Jaynes at 05:40 PM
September 04, 2009
SmartyCam Update
The, yet to be officially released in the US, SmartyCam has some updates available as well. New firmware and new software.
The SmartyCam firmware rolls to v1.00.12, which builds upon stability of the v1.00.10 just before it. Version 1.00.10 seems to have completely done away with any lockups of the SmartyCam LCD. This new version corrects the h.264 header information that allows for videos to be cut anywhere without the need to retain the first two frames.
SmartyManager, the software for previewing a mounted camera, and configuring the graphical elements on the resulting SmartyCam video, has been reved to version 1.01.02 and addresses the following issues:
- Fixed bug in new upper bound values and level indicator
- Improved custom logo and its preview
- Single combo for unit measure to set boundary and value
- Fixed bug when exiting application during on-lin preview, SmartyCam now returns to normal state
Both the new SmartyCam firmware and SmartyManager software can be downloaded here.
Given the recent stability refinements of the SmartyCam, the SmartyCam is only days away from being released in North America. Shortly thereafter, the remarkable list of additional SmartyCam features will be added.
[UPDATE 04-Sep-2009] Just received, and posted, SmartyCam firmware v1.00.16
Posted by Mike Jaynes at 01:05 AM
December 11, 2007
PRI News and Notes
The 20th Annual PRI Show has come and gone. The show went very well for us as we unveiled some exciting new products for 2008. Top of the list is our new DaVid2 video system which features playback via a full color screen in high def or can be downloaded to your computer via a compact flash card. A new channel expansion and thermocouple hub were introduced which will expand the capibility of our MXL line of loggers. The Data key idea has been expanded to what will function as a memory key for the MXL line as well. This will give the user an added memory upgrade to 32MB and may also be used for endurance racing where each driver can carry his or her own key which is hot swappable during pit stops. This will allow engineers to analyze data prior to the next pit stop and effect changes then. A new very very small EVO4 will be added spring of 2008.
Check back for further updates and pictures soon. You can also check out a video from our booth below.
http://motorrev.klipz.tv/view_video.php?viewkey=e3bef5e069713af9fa6c
Posted by MyChron Mike at 02:08 PM
June 15, 2007
Hondata ECU Conection
The Hondata protocol is now out of beta and working great! You can now connect your MXL, MyChron3 XG Log, or DaVid system directly to your Hondata KPro ECU and receive up to 23 channels of data from the ECU. Having such an ECU connection also frees up analog inputs for other input types like; steering position, shock travel/velocities, additional temps, additional pressures, infrared tire temps, and more. The KPro connection requires an inline circuit between the ECU and AiM dash/logger. The connection is available now for $75 USD. --Update Nov. 29th, 2007 - Works with model PRB KPro.
Posted by Mike Jaynes at 02:26 AM
Hondata ECU Conection
The Hondata protocol is now out of beta and working great! You can now connect your MXL, MyChron3 XG Log, or DaVid system directly to your Hondata KPro ECU and receive up to 23 channels of data from the ECU. Having such an ECU connection also frees up analog inputs for other input types like; steering position, shock travel/velocities, additional temps, additional pressures, infrared tire temps, and more. The KPro connection requires an inline circuit between the ECU and AiM dash/logger. The connection is available now for $75 USD. --Update Nov. 29th, 2007 - Works with model PRB KPro.
Posted by Mike Jaynes at 02:26 AM
May 08, 2007
Attention 4-Cycle Racers!
One cable, RPM and Power
A little known secret to the MyChron4 is it's ability to not only get a perfect RPM signal by connecting directly to a 4-cyle coil, but also to use excess power from the coil to completely power the gauge while the engine is running. This greatly increases the internal 9V battery life since the internal battery is only used for downloading or on screen data review while the engine is not running.
Straight to the Source for Perfect RPM Readings
The perfect RPM signal cannot be overlooked. Oval racers, in particular, know the importance of getting accurate low and high RPM readings. The difference in these two numbers, highlighted by the MyChron4, is critical in getting a good setup — there is no better indicator.
A Secret No More
Perfect RPM's and greatly extended battery life is no longer a secret, it's a $30 cable that plugs into the expansion port of your MyChron4.
Posted by Mike Jaynes at 08:50 PM
April 12, 2007
MyChron4 T2
Finally we have started shipping the MyChron4 2 temperature gauges. This gives the MyChron line an added option for those needing 2 temperatues in a compact system. The gauge can be ordered with any combination of temps including EGT, CHT and H20.
AiM Sports
Posted by MyChron Mike at 04:53 PM
April 02, 2007
New Goodies
AiM Sports is proud to announce that our first Oval only wheel has begun shipping to dealers. Look for it at your local kart shop or at a track near you soon.
AiM Sports
Posted by MyChron Mike at 07:03 PM
March 29, 2007
Formula Car Pr0n!
A new photo of our forthcoming Formula Car Wheel, this one a production model. Specs and prices coming soon.
Posted by Mike Jaynes at 10:37 PM | Comments (1)
January 19, 2007
Formula Wheel
Here is a photo of our new Formula Wheel which should arrive here in April. Check back later for specs.
Posted by MyChron Mike at 10:36 AM
January 18, 2007
Greenvious
AiM Sports is pleased to announce a couple of new additions to our popular steering wheel line up for 2007. Soon we will have available two new colors, Green and Blue. They should be available mid February so contact your servicing dealer now to get your order in.
MyChron Mike
Image updated on 1/22/2007
Posted by MyChron Mike at 01:57 PM
November 08, 2006
MyChron4 Steering Wheels Are Gorgeous!
We just received 4 samples of the new M4 Wheels and they are awesome! All new colors with grey or purple center sections embossed with the AiM logo, a new rubber like material where your hands grip the wheel and the quality is outstanding. We hope to begin shipping to our dealer network around the end of November. Just in time for the holiday season as these will make a great gift for yourself or that special racer in the family.
MyChron Mike
Posted by MyChron Mike at 02:52 PM
November 02, 2006
New Wheel For Your Ride
AiM is happy to announce the new MyChron4 steering wheel will become available just after Thanksgiving. Available in 4 exciting new colors be sure to get this on your Christmas wish list!
Posted by MyChron Mike at 06:53 PM
October 20, 2006
New Improved Water Sensor and Coupler
AiM is pleased to announce a new improved water sensor. The new thermoresitive sensor which is more accurate at lower temperatures, much stronger and less susceptible to extraneous ingnition noise. This new sensor may be installed directly into the head on TAG motors or used in conjuction with our new in line water adaptor for all other applications. The sensors are available now and may be identified by their black wire and round 4 pin connector. The coupler is also available in our new Titanium color.
MyChron Mike
Posted by MyChron Mike at 12:53 PM | Comments (1)
July 27, 2006
MyChron4 Picture Manager Released
The MyChron4 Picture Manager Software has been released. Available for free download, the software allows you to upload your own images to your MyChron4 for display upon startup (instead of the "AiM" logo that comes up now). A Datakey is needed to complete the process; you can borrow a friend's if you don't have your own.
Now you can upload your team logo, photos of your best friend's mom, Danika Patrick or other "inspirational" images.
MyChron Chad says "The picture manager for the MyChron4 works great!"
Basic procedure
• Connect your MyChron4 to the PC with the Data Key.
• Switch your MyChron4 on and press the MENU button.
• Launch M4 Picture Manager Software
• Click on LOAD IMAGE button and select an image.
• Click on UPLOAD button to upload the image chosen on your MyChron4.
Allowed formats and logo modification
M4 Picture Manager Software manages the most common image file types, such as Bitmap (*.bmp), GIF (*.gif) and JPEG (*.jpg). M4 Picture Manager automatically modifies the image you have chosen to get a two-color format fitting the dimensions of MyChron4 display (160 X 90 pixel). The original one is shown in grayscale in the “Original Picture” window, while a preview of the image as you’ll see it on your logger is visualized in the “Output” window.
With M4 Picture Manager you can easily play with your image to get the best graphic results. You can:
• Modify the image brightness with the “Black Treshold” cursor;
• Rotate the image selecting the “Flip Vertical” or “Flip Horizontal” option;
• Get the negative of your image selecting the “Reverse” option.
Additional functions
To save the image you have chosen just click on the “Save as…” button and choose a file name. The image is saved as a two-colour bitmap file (160 X 90 pixel). To reset the original AIM default logo just press the “Erase” button.
Posted by aimsports at 10:42 PM | Comments (6)
July 12, 2006
MyChron4 Questions Answered
How do I change the display color from green to orange? You can't. There are 2 different models of MyChron4, one with a green backlight and another with an amber/orange backlight. If you have a strong preference, be sure to check before you buy. Perhaps in the future a multicolor display will be possible.
How do I upload my team logo to the MyChron4? This feature is not yet enabled, look for a future software release. Keep up to date with software releases by checking the MyChron4 Updates and Downloads page. You'll need the Data Key at that time.
When is the E-box expected? It looks like there will be 2 different e-boxes, the first one coming in late July. The first one will deliver speed, track mapping, and 2 temps, as well as more battery power. The larger one, just announced, will have more channels. See this post below for a glimpse.
Contact us with any questions.
Posted by aimsports at 03:23 PM | Comments (1)
July 03, 2006
E-Box Arrives!
I received the first E-Box for testing today and its way too cool. I simply used my E-Key and updated the firmware in my M4, plugged in the E-Box and then used in display menu to set up my speed channel, temperature alarms and calibrate the lateral accelerometer using a menu item. No more hooking up a cable to zero the lateral G sensor. How cool is that?
Hopefully we will be able to find someone who would like to test the M4/E at the Stars of Karting race this upcoming weekend at Lowes Motor Speedway. If you're interested shoot me an email at mc@aimsports.com and we will see what happens.
MyChron Mike
Posted by MyChron Mike at 05:48 PM | Comments (4)
June 30, 2006
MyChron4 Steering Wheel
After rejecting the first couple of designs from outside firms, our own design team came up with this beautiful new steering wheel design for the MyChron4. This new wheel is expected to be shipping in early August in a variety of exciting new colors.
Posted by Mike Jaynes at 06:13 PM | Comments (2)
June 19, 2006
AiM Sports Wideband Lambda Controller
It looks like we are close to shipping our Lambda Control Unit, something we have been excited about since we saw the first prototypes last fall. This unit utilizes a Bosch sensor to monitor air/fuel ratios in your engine, also known as lambda. The unit is intended mainly for automotive use as an expansion to our MXL Pista and MXL Pro data loggers, though other uses including standalone seem possible. Pricing and availabililty are not yet set. Look for more information soon!
Posted by aimsports at 12:48 PM
June 02, 2006
MXL Display for AEM Engine Management Systems Getting Some Attention
Recently we announced that our MXL digital displays and data loggers now supported AEM's programmable engine management systems. This means that if you're using an AEM system to control your car's performance, you can easily plug in an MXL system and add a stunning display and powerful data logger.
Modified Magazine has listed the MXL under "Hot Products". SEMA has listed the MXL and AEM integration as a hot product. If you're tuning a performance car, involved with import tuning, the AEM/MXL combo is one of the best value for performance packages you can get.
As we posted earlier, the AMS Motorsports team Lancer EVO 8 ran the MXL/AEM combo in the One Lap of America, finishing 3rd overall.
Posted by aimsports at 04:31 PM
May 22, 2006
New RPM Clip for Kart Racers
A reminder to kart racers that we have a new style RPM clip that replaces the previous metal clip. These clips were originally introduced at Kartfest in January.
Use the new RPM clip to keep your tach sensor wire firmly wrapped around your spark plug wire.
To install the new clip, first cut off the old metal clip. Snap the new clip to the plug wire. Run the RPM lead through one hole, loop it around the plug wire a few turns, pull it snug, then run the lead back through other hole.
A properly installed RPM clip is shown below:
Get the new clips from your local dealer or contact us.
Posted by aimsports at 07:09 PM | Comments (2)
April 13, 2006
Field of Dreams
First shipments of the new MyChron4 are heading out this week. Just imagine all the joy, sweat, tears and exhilaration these gauges will witness over the coming years. We're very proud of the MyChron4 and appreciate your patience as we've worked to make it our best product ever.
Posted by aimsports at 05:18 PM | Comments (1)
March 29, 2006
Lap Timer Holders for the TG Light
Contributed by Erik Nielsen,
Director of Marketing
We now have nice aluminum mounts in stock for the MyChron Light TG. These are designed to mount to motorcycle forks and are available in a wide range of sizes and colors. Price is $30 and you can order them in our on-line store.
Posted by aimsports at 08:42 PM
March 14, 2006
MyChron4 Spotted in the Wild
|
Contributed by Erik Nielsen, The AiM team was at Lowe's Motor Speedway this past weekend for the WKA Manufacturer's Cup races. In addition to our normal support work we also installed a few MyChron4 test units and the response was amazing. Everything is working well and the guys were thrilled to have them on their karts. Thanks to everyone for their patience in awaiting the release of this awesome product. Check out these photos from Rick Boake's ICC kart (#6 on the S3 Racing team). Keep in mind these are testing units, the final screens may be a bit different. The first shot shows the Race Summary screen, which will come up with one key press as soon as the race/session ends. It shows the best 3 laps with the high and low RPMs, the RPM drops and the temps. Hit another key and see the next screen, a lap time graph. No bars are the laps with the fastest lap times, the taller the bar, the slower you were. Easy to see where you were coming in and out. The drivers also commented on the Predicted Lap Time feature, an AiM Sports exclusive feature. Predictive (or forecast) Lap Timing is a feature that analyzes your driving and shows you early in each lap what it anticipates your lap time will be for the current lap. Very helpful for qualifying as you can see if it's worthwhile to burn up the tires on a fast lap or better to hold off until next lap. How was the racing? Awesome. Over 600 entries for the weekend meant lots of action on the track. Some delays on Saturday due to rain caused the mains to be shortened but Sunday seemed to go smoothly. |
 |
 |
Notice how easy it is to read the display, even in the bright sunlight. |
||
 |
||
Race Summary screen, showing best 3 laps. Essential information at your fingertips. |
||
 |
||
Lap time graph. Best lap indicated with the arrow and vertical line. The taller the bar, the slower the lap was in relation to the fastest lap. |
Posted by aimsports at 04:45 PM | Comments (2)
March 01, 2006
Cool, Sweet, Awesome, Wow
In early testing with the powerful new MyChron4 all I can say is wow. Besides having the best display you could hope for, the on screen review is so awesome! Excuse my unfettered excitement but this thing is going to be so good that I wish I raced! Now that would be a sight.
MyChron Mike
Posted by MyChron Mike at 01:41 PM | Comments (1)
February 19, 2006
M4 Stickers
Be the first on your block to proudly display the all new MyChron4 decals. Send your name and address to http://www.aimsports.com/weblog/stickers.html to receive them in the mail right away.
MyChron Mike
Posted by MyChron Mike at 07:25 PM | Comments (1)
February 10, 2006
Powerful Stuff
I can hardly contain my excitement with regard to the new MyChron4. This gauge and some of the technology associated with is a true quantum leap in data acquisition. It is hard to restrain myself from jumping up and down when I think about the features and analysis options for the racer and their crew. Yesterday I spoke with Michael Jaynes who has been in Italy for the past week finalizing all the firmware functions which we have been putting together for quite some time in preparation for making this the most powerful gauge we have ever produced. I mean this thing is going to be so good! When you add in the expansion capabilities coupled with the power of on screen analysis and the eKey look out! It has taken many people who arent afraid of change along with all of our customers who use our products and offer feedback and suggestions to move this product from an idea to the race track. To all of you I offer a sincere thank you! You can take a peek at many of the features by clicking on the link below.
http://www.aimsports.com/products/mychron4/index.html
Posted by MyChron Mike at 10:40 AM
January 28, 2006
MyChron4!
Posted by MyChron Mike at 12:27 AM | Comments (8)
January 11, 2006
Kartfest
Well it's down to the two week countdown before we leave for KartFest. We exhibit at quite a few shows in the off season, the reason I call it the off season is that I get a couple of weekends off during that time period. I love KartFest for many reason but most of all we get to see all of our customers and dealers in a slower more relaxed environment. Yeah right! KartFest is crazy and packed full of people but its the best.
We are going to have a new addition to our product line and you are going to have a hand in deciding its final design. For the best suggestion on improving this new product we will be giving one away to the winner. Heck if we get more than one great idea we will probably give a few away. Look for more info here in the next few days.
Posted by MyChron Mike at 09:21 AM
January 10, 2006
New improved RPM clip
In an effort to cut down on the number of times Chad or myself get paged to someones pit who is complaining of incorrect RPMs only to find a broken wire at the clip junction we have produced a new RPM clip. This new clip will eliminate the problem of broken wires at the clip junction, erratic RPM on the Animal engines due to the metal clip coming in contact with the shrouding. Installed properly it will also ensure a more consistent RPM especially in the very important low corner RPM reading.
Click the photo to see a larger image.
Posted by MyChron Mike at 07:52 PM | Comments (2)