|
| TECHNICAL SPECIFICATIONS |
|
|
|
| ECU connection |
CAN, RS232, K-Line |
| External modules connection |
GPS09c, Channel Expansion, TC Hub, Lambda controller,
SmartyCam 3 Series |
| Analog inputs |
8 fully configurable: 0-5V, 0-12V, K thermocouples.
Max freq 1 KHz each |
| Digital inputs |
Coil RPM and 4 speed inputs |
| Inertial platform |
Internal 3 axis ±5G accelerometer + 3 axis gyro |
| Digital outputs |
2, up to 1 A each |
| Second CAN |
Yes |
| Wi-Fi connection |
Yes |
| Internal memory |
4 GB |
| SD card |
Internal: up to 128 GB (not included) |
| Connectors |
2 Motorsport |
| Body |
Anodized aluminum |
| LEDs |
1 system status |
| Dimensions |
114.4x47.2x58.8 mm |
| Weight |
300 g |
| Waterproof |
IP65 |
|
|
| IN THE BOX |
|
EVO5, harness and GPS09c. User manual & software freely downloadable. |
|
| INSTALLATION |
|
For a correct EVO5 installation it is important to follow some simple rules.
Carry out CAN, serial or K-line connection only AFTER performing the logger configuration with RaceStudio 3.
For a correct working of the integrated three-axial accelerometer and gyroscope, EVO5 is to be placed in a central position of the car (ideally in the vehicle's centre of gravity).
GPS module is not to be positioned under metal or carbon fibre objects, which would greatly reduce the satellite signal quality.
Also avoid the positioning close to other antennas, digital cameras or TFT displays.
Finally, avoid to install the product with tense cables. |
|
|
|
|
|
