AiM logo
TECHNICAL SPECS        SW/FW DOWNLOAD        DOCUMENTATION        PICTURES
Solo 2/Solo 2 DL
The brand new GPS lap timers for motorsports
Solo 2
the most precise and easy way to get lap times
The new Solo 2 receives the data from two satellites constellations, GPS and Glonass: this is a huge step forward since it is unbelievably faster and more precise than the previous version.
The power ON requires only a few seconds and the lap times are calculated with a max 2/100 sec of tolerance.
The screen can be backlited in one of the seven available colors:
Find your track easily and quickly
Solo 2 can rely on a database of more than 3,000 tracks all over the world: as soon as it switches on, Solo 2 identifies its position, recognizes the starting line coordinates of the track and starts sampling lap times.
In case the track is not in the database, no problem: Solo 2 realizes it and enters into the autolearning mode, automatically understands the characteristics of the track and gives the lap time anyway.
Even the predictive lap time is much more reliable,
and the configurable RGB LEDs
will give you a clear and fast indication
of the comparison with your best lap.
Race mode selection
Solo 2 can manage different types of races:
Speed races in a closed circuit
Point to-point races
Regularity
Performance tests (0-100 km/h etc.)
In each of these configurations,
Solo 2 gives the proper information
during the test and powerful data
review immediately after each session.
Data recall on screen
At the end of your test,
you can quickly review
all the key information on your display.
Wi-Fi communication
with the PC
Wi-Fi connection: easy, fast, without
connectors nor cables: the best way
to configure your Solo 2, to manage
the track database, to download
the data to your PC.
iPhone connection
Use your iPhone for a quick and comfortable
data analysis, for managing the track
database and even for an On-Line view
of the most important parameters
of your Engine
(in case you have chosen the Solo 2 DL).
Solo 2 DL, the Solo with ECU connection
More than 1,000 protocols for 1,000+ ECU in the database,
for easily connect your Solo 2 DL to your Engine Control Unit
and get a lot of information with just one cable.
In case your ECU protocol is not in the database, no problem:
an ECU Driver Builder is always available in the Race Studio 3
configuration software, and you will be able to create
your protocol by yourself.

Coil RPM input

Solo 2 DL now features a digital input allowing to log RPM
either from square wave signals (8-50 V each signal)
or pulse signals (150-450 V ignition coil trigger primary circuit).
SmartyCam HD connection
The perfect connection: get all the data from your ECU, merge them with the GPS information and transmit everything to the SmartyCam HD, that will show them in graphical overlay in the video.